For this one I just used my hand to put different amounts of pressure onto the paper and where I have put the most amount of pressure the mark is allot darker because it picked up more ink.
I started using different tools and experimenting with witch types of marks these tools will make.
I sprayed water straight onto the ink and then genitally placed the paper over the ink creating this print.
While experimenting I found some white spirit and sprayed it onto the ink board then placed the paper onto of the ink, I found it interesting because where the white spirit was on to the ink it had taken the ink away leaving these white marks.
Next I picked up a ruler and I started to scrape the ink away off the board. In my opinion it created a ribbon effect.
These are some other prints where I have sprayed white spirit onto the ink to erode parts of the black ink, where the white spirit was sprayed you can see the bubbles and the lighter areas.
I used different marks for this print, to me it looks like a field with a fence in the middle of it.
<<Negative on back of paper
Actual print >>
I did the same for this print here on the left.
On the right I drew into the ink using the back of a pencil.
I also used a fine tip pencil to draw these two into the in because I wanted the line to be fine and so you can see the most of the detail.
No comments:
Post a Comment